 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Analog Pigtailed PIN Photodiodes Technical Data PDA2446 Features * Variety of Flange/Pinout Options * Compact Package * High Reliability Planar InGaAs PIN Photodiode * High Responsivity * High Linearity * Low Back Reflection * High Bandwidth >1.5 GHz * -40C to +85C Operating Temperature Range Description The PDA range of products includes a variety of compact fiber pigtailed devices designed for wide operating temperature, low cost applications such as fiber in the loop. The planar InGaAs photodiodes are manufactured using MOVPE growth technology and give low leakage and high responsivity performance with excellent reliability. The construction of the devices includes a hermetically sealed photodiode and an actively aligned fiber pigtail and is designed to be compatible with the environmental requirements of the Bellcore TA-NWT-000983 document. The product range includes a variety of pinout, fiber type, and package mounting bracket Applications * CATV/CCTV * Fiber in the Loop (FITL) options, designed to match the majority of offerings in the marketplace. If the specific arrangement or performance you require is not listed, please contact Hewlett-Packard. High flexible design and manufacturing processes allow both physical and electro-optic customization to suit your needs. 532 5965-7314E (4/97) PDA Pigtailed Photodiode Specifications Absolute Maximum Ratings Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided that each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same time. Parameter Reverse Voltage Reverse Current Forward Voltage Forward Current Power Dissipation Operating Temperature Storage Temperature Soldering - 10 seconds Fiber Pull Symbol Vr Ir Vf If Tc Ts - Minimum -40 -40 - Maximum 20 1 1 5 50 +85 +85 +260 10 Units V mA V mA mW C C C N Performance Specifications Test Conditions: Unless Otherwise Stated Vr = 5 V, Tc = +25C Tc= +85C Ir = 10 A 1 MHz = 1300 nm 80% points PDA2446 Min. Max. 1 50 35 1.7 0.7 1200 1650 1.5 -70 Parameter Dark Current Reverse Breakdown Voltage Capacitance Responsivity Operating Wavelength Small Signal Bandwidth Linearity Second Order Symbol Id Vbr C R Bw X1 - Units nA nA V pF A/W nM GHz dBc Third Order - Vr = 15 V fl = 135 MHz f2 = 190 MHz 70% Modulation 0 dBm Optical Power As above -85 dBc Fiber Pigtail: Tight jacketed, self-mode stripping, singlemode fiber Parameter Length Core Diameter Cladding Diameter Concentricity Error Secondary Jacket Diameter Minimum 1.0 8 122 0.8 Maximum 10 128 8 1.0 Units m m m % mm 533 PDA Mechanical Outline Options PDA2446-B C D A F B E DIM. G A B C D MIN. - - 12.0 - MAX. 25.0 6.5 - 8.5 DIM. E F G MIN. 0.41 MAX. 0.47 1000 - 2.54 NOM. ALL DIMENSIONS IN MILLIMETERS PDA2446-D J K C D G A F H L E P B DIM. MIN. - - 12.0 - 0.41 1000 MAX. 25.0 6.5 - 8.5 0.47 18.0 - DIM. H J K L M N P MIN. MAX. N M A B C D E F G 12.7 NOM. 7.5 - 1.1 0.9 7.5 - 4.2 3.8 2.54 NOM. 2.4 2.1 ALL DIMENSIONS IN MILLIMETERS PDA2446 Electrical Pin-Outs 2 1 3 PIN 1: CATHODE +VE PIN 2: CASE PIN 3: ANODE -VE 3 1 534 Ordering Information PDA2446 - XI - XX Connector Type: AP = Angle Polished FC/PC AS = Angle Polished SC/PC US = Ultra Polished SC/PC SF = Super Polished FC/PC Flange Type: B = Barrel D = 2 hole PCB mount, 12.7 mm between centers Additional options are available to meet your specific needs. Please contact your local representative for details. 535 Discrete Pin-Preamplifiers Preliminary Technical Data PPA0052, PPA1052 PPA0155, PPA1155 Features * Integrated InGaAs PIN and GaAs Preamplifier * FC or SC Receptacle or Fiber Pigtailed * Compact Package * High Reliability Planar InGaAs PIN Photodiode * High Responsivity Description The PPA*052 and PPA*155 are compact connectorized or pigtailed InGaAs photodiodes with preamplifier designed for wide operating temperature range, low cost applications such as SONET/SDH and Fiber in the Loop. The planar InGaAs photodiodes are manufactured using MOVPE growth technology which gives low leakage and high responsivity performance with excellent reliability. The wide dynamic range GaAs IC preamplifier ensures compliance with SONET/SDH standards. The construction of the devices includes a hermetically sealed photodiode and amplifier actively aligned within a receptacle housing or to a fiber pigtail and is designed to be compliant with Bellcore TA-TSY-000983. Applications SONET/SDH Instrumentation O-E Converters Single and Multimode Fiber Communications Systems * Data Communication Receivers * FDDI * * * * Preliminary Product Disclaimer This preliminary data sheet is provided to assist you in the evaluation of engineering samples of the product which is under development and targeted for release during 1997. Until Hewlett-Packard releases this product for general sales, HP reserves the right to alter prices, specifications, features, capabilities, function, manufacturing release dates, and even general availability of the product at any time. 536 (5/97) Performance Specifications Absolute Limiting Ratings Absolute (limiting) ratings mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided that each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same time. Parameter Supply Voltage Photodiode Voltage (Negative) Power Dissipation Operating Temperature Storage Temperature Soldering - 10 seconds Fiber Pull Symbol VDD V pin Tc Ts - Minimum -40 -40 - Maximum 5.5 -7 350 +85 +85 +260 10 Units V V mW C C C N Performance Specifications[1] Parameter Responsivity Sensitivity[2] Overload[2,3] Bandwidth Output Impedance VDD Supply Voltage VDD Supply Current Photodiode Supply Minimum 0.75 -39 -36 -7 35 90 30 4.75 -7 Maximum 60 5.25 50 -4.5 Units A/W dBm dBm MHz ohms V mA V 52 Mb/s 155 Mb/s 52 Mb/s 155 Mb/s Notes: 1. Measured over the operating temperature range and power supply tolerance. 2. Measured at the data rate specified for 1 x 10-10 using an infinite extinction ratio laser source modulated with a 223-1 PRBS pattern. 3. Higher overload performance available. Contact your local Hewlett-Packard Components representative for details. Fiber Pigtail: Tight jacketed, self-mode stripping, multimode Parameter Length Core Diameter Cladding Diameter Concentricity Error Secondary Jacket Diameter Minimum 0.4 47 122 0.8 Maximum 1.2 53 128 8 1.0 Units m m m % mm Schematic Diagram 4 VDD +5 V 1. GND 2. VOUT 3. V pin 4. +VDD V pin -5 V 3 GND 1 2 O/P 537 Drawing Dimensions PPA0052-FC-A PPA0155-FC-A C 1. 2. 3. 4. 1 GND VOUT V pin +VDD N P R DIM. A B C D E F G H MIN. MAX. DIM. J L M N P Q R MIN. MAX. 19.5 - 9.5 - 15.0 - 9.1 - - 12.0 0.33 0.27 M8 x 0.75 13.35 13.55 2.08 2.32 - 1.65 - 2.2 - 6.8 - 8.2 2.54 NOM. - 4.2 SLOT 4 3 2 D F G H A L Q E M J B ALL DIMENSIONS IN MILLIMETERS PPA0052-SC-A PPA0155-SC-A A F E D DIM. A B C D E F MIN. - - - - - 12.0 MAX. 9.5 23.0 13.5 15.5 8.0 - DIM. G H J K L M MIN. MAX. 2.0 3.0 0.27 0.33 - 7.5 2.08 2.5 2.54 NOM. 17.8 18.2 L 4 3 SLOT 1 2 J H C B M ALL DIMENSIONS IN MILLIMETERS G K PPA1052-A PPA1155-A H A DIM. M 1 B L 4 3 N G K 2 E C D F A B C D E F MIN. - - 12.0 - 0.27 400 MAX. 25.0 19.5 - 9.5 0.33 1200 DIM. G H K L M N MIN. - - MAX. 9.5 2.0 2.54 NOM. 13.35 13.55 2.1 2.4 - 6.25 ALL DIMENSIONS IN MILLIMETERS 538 PPA1052-D PPA1155-D J K C 1 B L 4 3 2 P E D F A DIM. A B C D E F G MIN. - - 12.0 - 0.27 MAX. 25.0 18.0 - 9.5 0.33 1200 DIM. H J K L M N P MIN. MAX. 3.8 4.2 - 7.5 0.9 1.1 12.7 NOM. 2.1 2.4 - 6.25 - 7.5 M H N 400 2.54 NOM. ALL DIMENSIONS IN MILLIMETERS G Ordering Information Allowable Part Numbers: PPA0052 - FC - A PPA0052 - SC - A PPA1052 - A - FP PPA1052 - A - ST PPA1052 - A - DN PPA1052 - A - SC PPA1052 - D - FP PPA1052 - D - ST PPA1052 - D - DN PPA1052 - D - SC PPA0155 - FC - A PPA0155 - SC - A PPA1155 - A - FP PPA1155 - A - ST PPA1155 - A - DN PPA1155 - A - SC PPA1155 - D - FP PPA1155 - D - ST PPA1155 - D - DN PPA1155 - D - SC PPA0052 - XX - A PPA0155 - XX - A Receptacle Type: FC = FC SC = SC PPA1052 - X - XX PPA1155 - X - XX Connector Type: FP = FC/PC ST* = ST DN = DIN SC = SC Flange Type: A = 2 hole Panel mount, 13.4 mm between centers D = 2 hole PCB mount, 12.7 mm between centers *ST is a registered trademark of AT&T. 539 |
Price & Availability of PPA1052
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |